From 39711cf6c2ec5a3b4480dcb4800cc3802bda5bf2 Mon Sep 17 00:00:00 2001
From: Lukasz Kasprzak <lukasz.kasprzak@pm.me>
Date: Fri, 20 Mar 2026 19:16:32 +0100
Subject: feat: first fully successful run e2e on straper

---
 .../public/zfs/etc-zfs/zed.d/deadman-slot_off.sh   | 71 ++++++++++++++++++++++
 1 file changed, 71 insertions(+)
 create mode 100755 straper/db/public/zfs/etc-zfs/zed.d/deadman-slot_off.sh

(limited to 'straper/db/public/zfs/etc-zfs/zed.d/deadman-slot_off.sh')

diff --git a/straper/db/public/zfs/etc-zfs/zed.d/deadman-slot_off.sh b/straper/db/public/zfs/etc-zfs/zed.d/deadman-slot_off.sh
new file mode 100755
index 0000000..7b339b3
--- /dev/null
+++ b/straper/db/public/zfs/etc-zfs/zed.d/deadman-slot_off.sh
@@ -0,0 +1,71 @@
+#!/bin/sh
+# shellcheck disable=SC3014,SC2154,SC2086,SC2034
+#
+# Turn off disk's enclosure slot if an I/O is hung triggering the deadman.
+#
+# It's possible for outstanding I/O to a misbehaving SCSI disk to neither
+# promptly complete or return an error.  This can occur due to retry and
+# recovery actions taken by the SCSI layer, driver, or disk.  When it occurs
+# the pool will be unresponsive even though there may be sufficient redundancy
+# configured to proceeded without this single disk.
+#
+# When a hung I/O is detected by the kmods it will be posted as a deadman
+# event.  By default an I/O is considered to be hung after 5 minutes.  This
+# value can be changed with the zfs_deadman_ziotime_ms module parameter.
+# If ZED_POWER_OFF_ENCLOSURE_SLOT_ON_DEADMAN is set the disk's enclosure
+# slot will be powered off causing the outstanding I/O to fail.  The ZED
+# will then handle this like a normal disk failure and FAULT the vdev.
+#
+# We assume the user will be responsible for turning the slot back on
+# after replacing the disk.
+#
+# Note that this script requires that your enclosure be supported by the
+# Linux SCSI Enclosure services (SES) driver.  The script will do nothing
+# if you have no enclosure, or if your enclosure isn't supported.
+#
+# Exit codes:
+#   0: slot successfully powered off
+#   1: enclosure not available
+#   2: ZED_POWER_OFF_ENCLOSURE_SLOT_ON_DEADMAN disabled
+#   3: System not configured to wait on deadman
+#   4: The enclosure sysfs path passed from ZFS does not exist
+#   5: Enclosure slot didn't actually turn off after we told it to
+
+[ -f "${ZED_ZEDLET_DIR}/zed.rc" ] && . "${ZED_ZEDLET_DIR}/zed.rc"
+. "${ZED_ZEDLET_DIR}/zed-functions.sh"
+
+if [ ! -d /sys/class/enclosure ] ; then
+	# No JBOD enclosure or NVMe slots
+	exit 1
+fi
+
+if [ "${ZED_POWER_OFF_ENCLOSURE_SLOT_ON_DEADMAN}" != "1" ] ; then
+	exit 2
+fi
+
+if [ "$ZEVENT_POOL_FAILMODE" != "wait" ] ; then
+	exit 3
+fi
+
+if [ ! -f "$ZEVENT_VDEV_ENC_SYSFS_PATH/power_status" ] ; then
+	exit 4
+fi
+
+# Turn off the slot and wait for sysfs to report that the slot is off.
+# It can take ~400ms on some enclosures and multiple retries may be needed.
+for i in $(seq 1 20) ; do
+	echo "off" | tee "$ZEVENT_VDEV_ENC_SYSFS_PATH/power_status"
+
+	for j in $(seq 1 5) ; do
+		if [ "$(cat $ZEVENT_VDEV_ENC_SYSFS_PATH/power_status)" == "off" ] ; then
+			break 2
+		fi
+		sleep 0.1
+	done
+done
+
+if [ "$(cat $ZEVENT_VDEV_ENC_SYSFS_PATH/power_status)" != "off" ] ; then
+	exit 5
+fi
+
+zed_log_msg "powered down slot $ZEVENT_VDEV_ENC_SYSFS_PATH for $ZEVENT_VDEV_PATH"
-- 
cgit v1.3