feat: first fully successful run e2e on straper

4 files changed, 122 insertions, 0 deletions

diff --git a/straper/db/public/boot/initramfs-tools/conf.d/resume b/straper/db/public/boot/initramfs-tools/conf.d/resume
new file mode 100644
index 0000000..213a0e2
--- /dev/null
+++ b/straper/db/public/boot/initramfs-tools/conf.d/resume
@@ -0,0 +1 @@
+RESUME=none
diff --git a/straper/db/public/boot/initramfs-tools/initramfs.conf b/straper/db/public/boot/initramfs-tools/initramfs.conf
new file mode 100644
index 0000000..aa561bd
--- /dev/null
+++ b/straper/db/public/boot/initramfs-tools/initramfs.conf
@@ -0,0 +1,90 @@
+#
+# initramfs.conf
+# Configuration file for mkinitramfs(8). See initramfs.conf(5).
+#
+# Note that configuration options from this file can be overridden
+# by config files in the /etc/initramfs-tools/conf.d directory.
+
+#
+# MODULES: [ most | netboot | dep | list ]
+#
+# most - Add most filesystem and all harddrive drivers.
+#
+# dep - Try and guess which modules to load.
+#
+# netboot - Add the base modules, network modules, but skip block devices.
+#
+# list - Only include modules from the 'additional modules' list
+#
+
+MODULES=most
+
+#
+# BUSYBOX: [ y | n | auto ]
+#
+# Use busybox shell and utilities.  If set to n, klibc utilities will be used.
+# If set to auto (or unset), busybox will be used if installed and klibc will
+# be used otherwise.
+#
+
+BUSYBOX=auto
+
+#
+# KEYMAP: [ y | n ]
+#
+# Load a keymap during the initramfs stage.
+#
+
+KEYMAP=n
+
+#
+# COMPRESS: [ gzip | bzip2 | lz4 | lzma | lzop | xz | zstd ]
+#
+
+COMPRESS=zstd
+
+#
+# COMPRESSLEVEL: ...
+#
+# Set a compression level for the compressor.
+# Defaults vary by compressor.
+#
+# Valid values are:
+# 1 -  9 for gzip|bzip2|lzma|lzop
+# 0 -  9 for  lz4|xz
+# 0 - 19 for zstd
+#
+# COMPRESSLEVEL=3
+
+#
+# DEVICE: ...
+#
+# Specify a specific network interface, like eth0
+# Overridden by optional ip= or BOOTIF= bootarg
+#
+
+DEVICE=
+
+#
+# NFSROOT: [ auto | HOST:MOUNT ]
+#
+
+NFSROOT=auto
+
+#
+# RUNSIZE: ...
+#
+# The size of the /run tmpfs mount point, like 256M or 10%
+# Overridden by optional initramfs.runsize= bootarg
+#
+
+RUNSIZE=10%
+
+#
+# FSTYPE: ...
+#
+# The filesystem type(s) to support, or "auto" to use the current root
+# filesystem type
+#
+
+FSTYPE=auto
diff --git a/straper/db/public/boot/initramfs-tools/modules b/straper/db/public/boot/initramfs-tools/modules
new file mode 100644
index 0000000..dd9dc54
--- /dev/null
+++ b/straper/db/public/boot/initramfs-tools/modules
@@ -0,0 +1,11 @@
+# List of modules that you want to include in your initramfs.
+# They will be loaded at boot time in the order below.
+#
+# Syntax:  module_name [args ...]
+#
+# You must run update-initramfs(8) to effect this change.
+#
+# Examples:
+#
+# raid1
+# sd_mod
diff --git a/straper/db/public/boot/initramfs-tools/update-initramfs.conf b/straper/db/public/boot/initramfs-tools/update-initramfs.conf
new file mode 100644
index 0000000..31823e2
--- /dev/null
+++ b/straper/db/public/boot/initramfs-tools/update-initramfs.conf
@@ -0,0 +1,20 @@
+#
+# Configuration file for update-initramfs(8)
+#
+
+#
+# update_initramfs [ yes | all | no ]
+#
+# Default is yes
+# If set to all update-initramfs will update all initramfs
+# If set to no disables any update to initramfs beside kernel upgrade
+
+update_initramfs=yes
+
+#
+# backup_initramfs [ yes | no ]
+#
+# Default is no
+# If set to no leaves no .bak backup files.
+
+backup_initramfs=no