feat: first fully successful run e2e on straper

1 files changed, 47 insertions, 0 deletions

diff --git a/straper/db/public/fail2ban/etc-fail2ban/action.d/firewallcmd-new.conf b/straper/db/public/fail2ban/etc-fail2ban/action.d/firewallcmd-new.conf
new file mode 100644
index 0000000..b06f5cc
--- /dev/null
+++ b/straper/db/public/fail2ban/etc-fail2ban/action.d/firewallcmd-new.conf
@@ -0,0 +1,47 @@
+# Fail2Ban configuration file
+#
+# Because of the --remove-rules in stop this action requires firewalld-0.3.8+
+
+[INCLUDES]
+
+before = firewallcmd-common.conf
+
+[Definition]
+
+actionstart = firewall-cmd --direct --add-chain <family> filter f2b-<name>
+              firewall-cmd --direct --add-rule <family> filter f2b-<name> 1000 -j RETURN
+              firewall-cmd --direct --add-rule <family> filter <chain> 0 -m state --state NEW -p <protocol> -m multiport --dports <port> -j f2b-<name>
+
+actionstop = firewall-cmd --direct --remove-rule <family> filter <chain> 0 -m state --state NEW -p <protocol> -m multiport --dports <port> -j f2b-<name>
+             firewall-cmd --direct --remove-rules <family> filter f2b-<name>
+             firewall-cmd --direct --remove-chain <family> filter f2b-<name>
+
+actioncheck = firewall-cmd --direct --get-chains <family> filter | sed -e 's, ,\n,g' | grep -q 'f2b-<name>$'
+
+actionban = firewall-cmd --direct --add-rule <family> filter f2b-<name> 0 -s <ip> -j <blocktype>
+
+actionunban = firewall-cmd --direct --remove-rule <family> filter f2b-<name> 0 -s <ip> -j <blocktype>
+
+# DEV NOTES:
+#
+# Author: Edgar Hoch
+# Copied from iptables-new.conf and modified for use with firewalld by Edgar Hoch.
+#  It uses "firewall-cmd" instead of "iptables".
+#
+# Output:
+# 
+# $ firewall-cmd --direct --add-chain ipv4 filter fail2ban-name
+# success
+# $ firewall-cmd --direct --add-rule ipv4 filter fail2ban-name 1000 -j RETURN
+# success
+# $ sudo firewall-cmd --direct --add-rule ipv4 filter INPUT_direct 0 -m state --state NEW -p tcp -m multiport --dports 22 -j fail2ban-name
+# success
+# $ firewall-cmd --direct --get-chains ipv4 filter
+# fail2ban-name
+# $ firewall-cmd --direct --get-chains ipv4 filter  | od -h
+# 0000000 6166 6c69 6232 6e61 6e2d 6d61 0a65
+# $ firewall-cmd --direct --get-chains ipv4 filter | grep -Eq 'fail2ban-name( |$)' ; echo $?
+# 0
+# $ firewall-cmd -V
+# 0.3.8
+