cleaned up many scrits and deleted some that were of no use; renamed a lot

11 files changed, 0 insertions, 363 deletions

diff --git a/straper/db/public/i2pd/etc-i2pd/i2pd.conf b/straper/db/public/i2pd/etc-i2pd/i2pd.conf
deleted file mode 100644
index c26f8af..0000000
--- a/straper/db/public/i2pd/etc-i2pd/i2pd.conf
+++ /dev/null
@@ -1,279 +0,0 @@
-## Configuration file for a typical i2pd user
-## See https://i2pd.readthedocs.io/en/latest/user-guide/configuration/
-## for more options you can use in this file.
-
-## Lines that begin with "## " try to explain what's going on. Lines
-## that begin with just "#" are disabled commands: you can enable them
-## by removing the "#" symbol.
-
-## Tunnels config file
-## Default: ~/.i2pd/tunnels.conf or /var/lib/i2pd/tunnels.conf
-# tunconf = /var/lib/i2pd/tunnels.conf
-
-## Tunnels config files path
-## Use that path to store separated tunnels in different config files.
-## Default: ~/.i2pd/tunnels.d or /var/lib/i2pd/tunnels.d
-# tunnelsdir = /var/lib/i2pd/tunnels.d
-
-## Path to certificates used for verifying .su3, families
-## Default: ~/.i2pd/certificates or /var/lib/i2pd/certificates
-# certsdir = /var/lib/i2pd/certificates
-
-## Where to write pidfile (default: /run/i2pd.pid, not used in Windows)
-# pidfile = /run/i2pd.pid
-
-## Logging configuration section
-## By default logs go to stdout with level 'info' and higher
-## For Windows OS by default logs go to file with level 'warn' and higher
-##
-## Logs destination (valid values: stdout, file, syslog)
-##  * stdout - print log entries to stdout
-##  * file - log entries to a file
-##  * syslog - use syslog, see man 3 syslog
-# log = file
-## Path to logfile (default: autodetect)
-# logfile = /var/log/i2pd/i2pd.log
-## Log messages above this level (debug, info, *warn, error, critical, none)
-## If you set it to none, logging will be disabled
-# loglevel = warn
-## Write full CLF-formatted date and time to log (default: write only time)
-# logclftime = true
-
-## Daemon mode. Router will go to background after start. Ignored on Windows
-## (default: true)
-# daemon = true
-
-## Specify a family, router belongs to (default - none)
-# family =
-
-## Network interface to bind to
-## Updates address4/6 options if they are not set
-# ifname =
-## You can specify different interfaces for IPv4 and IPv6
-# ifname4 =
-# ifname6 =
-
-## Local address to bind transport sockets to
-## Overrides host option if:
-## For ipv4: if ipv4 = true and nat = false
-## For ipv6: if 'host' is not set or ipv4 = true
-# address4 =
-# address6 =
-
-## External IPv4 or IPv6 address to listen for connections
-## By default i2pd sets IP automatically
-## Sets published NTCP2v4/SSUv4 address to 'host' value if nat = true
-## Sets published NTCP2v6/SSUv6 address to 'host' value if ipv4 = false
-# host = 1.2.3.4
-
-## Port to listen for connections
-## By default i2pd picks random port. You MUST pick a random number too,
-## don't just uncomment this
-# port = 4567
-
-## Enable communication through ipv4 (default: true)
-ipv4 = true
-## Enable communication through ipv6 (default: false)
-ipv6 = false
-
-## Bandwidth configuration
-## L limit bandwidth to 32 KB/sec, O - to 256 KB/sec, P - to 2048 KB/sec,
-## X - unlimited
-## Default is L (regular node) and X if floodfill mode enabled.
-## If you want to share more bandwidth without floodfill mode, uncomment
-## that line and adjust value to your possibilities. Value can be set to
-## integer in kilobytes, it will apply that limit and flag will be used
-## from next upper limit (example: if you set 4096 flag will be X, but real
-## limit will be 4096 KB/s). Same can be done when floodfill mode is used,
-## but keep in mind that low values may be negatively evaluated by Java
-## router algorithms.
-# bandwidth = L
-## Max % of bandwidth limit for transit. 0-100 (default: 100)
-# share = 100
-
-## Router will not accept transit tunnels, disabling transit traffic completely
-## (default: false)
-# notransit = true
-
-## Router will be floodfill (default: false)
-## Note: that mode uses much more network connections and CPU!
-# floodfill = true
-
-[ntcp2]
-## Enable NTCP2 transport (default: true)
-# enabled = true
-## Publish address in RouterInfo (default: true)
-# published = true
-## Port for incoming connections (default is global port option value)
-# port = 4567
-
-[ssu2]
-## Enable SSU2 transport (default: true)
-# enabled = true
-## Publish address in RouterInfo (default: true)
-# published = true
-## Port for incoming connections (default is global port option value)
-# port = 4567
-
-[http]
-## Web Console settings
-## Enable the Web Console (default: true)
-# enabled = true
-## Address and port service will listen on (default: 127.0.0.1:7070)
-# address = 127.0.0.1
-# port = 7070
-## Path to web console (default: /)
-# webroot = /
-## Enable Web Console authentication (default: false)
-## You should not use Web Console via public networks without additional encryption.
-## HTTP authentication is not encryption layer!
-# auth = true
-# user = i2pd
-# pass = changeme
-## Select webconsole language
-## Currently supported english (default), afrikaans, armenian, chinese, czech, french,
-## german, italian, polish, portuguese, russian, spanish, turkish, turkmen, ukrainian
-## and uzbek languages
-# lang = english
-
-[httpproxy]
-## Enable the HTTP proxy (default: true)
-# enabled = true
-## Address and port service will listen on (default: 127.0.0.1:4444)
-# address = 127.0.0.1
-# port = 4444
-## Optional keys file for proxy local destination (default: http-proxy-keys.dat)
-# keys = http-proxy-keys.dat
-## Enable address helper for adding .i2p domains with "jump URLs" (default: true)
-## You should disable this feature if your i2pd HTTP Proxy is public,
-## because anyone could spoof the short domain via addresshelper and forward other users to phishing links
-# addresshelper = true
-## Address of a proxy server inside I2P, which is used to visit regular Internet
-# outproxy = http://false.i2p
-## httpproxy section also accepts I2CP parameters, like "inbound.length" etc.
-
-[socksproxy]
-## Enable the SOCKS proxy (default: true)
-# enabled = true
-## Address and port service will listen on (default: 127.0.0.1:4447)
-# address = 127.0.0.1
-# port = 4447
-## Optional keys file for proxy local destination (default: socks-proxy-keys.dat)
-# keys = socks-proxy-keys.dat
-## Socks outproxy. Example below is set to use Tor for all connections except i2p
-## Enable using of SOCKS outproxy (works only with SOCKS4, default: false)
-# outproxy.enabled = false
-## Address and port of outproxy
-# outproxy = 127.0.0.1
-# outproxyport = 9050
-## socksproxy section also accepts I2CP parameters, like "inbound.length" etc.
-
-[sam]
-## Enable the SAM bridge (default: true)
-# enabled = false
-## Address and ports service will listen on (default: 127.0.0.1:7656, udp: 7655)
-# address = 127.0.0.1
-# port = 7656
-# portudp = 7655
-
-[bob]
-## Enable the BOB command channel (default: false)
-# enabled = false
-## Address and port service will listen on (default: 127.0.0.1:2827)
-# address = 127.0.0.1
-# port = 2827
-
-[i2cp]
-## Enable the I2CP protocol (default: false)
-# enabled = false
-## Address and port service will listen on (default: 127.0.0.1:7654)
-# address = 127.0.0.1
-# port = 7654
-
-[i2pcontrol]
-## Enable the I2PControl protocol (default: false)
-# enabled = false
-## Address and port service will listen on (default: 127.0.0.1:7650)
-# address = 127.0.0.1
-# port = 7650
-## Authentication password (default: itoopie)
-# password = itoopie
-
-[precomputation]
-## Enable or disable elgamal precomputation table
-## By default, enabled on i386 hosts
-# elgamal = true
-
-[upnp]
-## Enable or disable UPnP: automatic port forwarding (enabled by default in WINDOWS, ANDROID)
-# enabled = false
-## Name i2pd appears in UPnP forwardings list (default: I2Pd)
-# name = I2Pd
-
-[meshnets]
-## Enable connectivity over the Yggdrasil network  (default: false)
-# yggdrasil = false
-## You can bind address from your Yggdrasil subnet 300::/64
-## The address must first be added to the network interface
-# yggaddress =
-
-[reseed]
-## Options for bootstrapping into I2P network, aka reseeding
-## Enable reseed data verification (default: true)
-verify = true
-## URLs to request reseed data from, separated by comma
-## Default: "mainline" I2P Network reseeds
-# urls = https://reseed.i2p-projekt.de/,https://i2p.mooo.com/netDb/,https://netdb.i2p2.no/
-## Reseed URLs through the Yggdrasil, separated by comma
-# yggurls = http://[324:71e:281a:9ed3::ace]:7070/
-## Path to local reseed data file (.su3) for manual reseeding
-# file = /path/to/i2pseeds.su3
-## or HTTPS URL to reseed from
-# file = https://legit-website.com/i2pseeds.su3
-## Path to local ZIP file or HTTPS URL to reseed from
-# zipfile = /path/to/netDb.zip
-## If you run i2pd behind a proxy server, set proxy server for reseeding here
-## Should be http://address:port or socks://address:port
-# proxy = http://127.0.0.1:8118
-## Minimum number of known routers, below which i2pd triggers reseeding (default: 25)
-# threshold = 25
-
-[addressbook]
-## AddressBook subscription URL for initial setup
-## Default: reg.i2p at "mainline" I2P Network
-# defaulturl = http://shx5vqsw7usdaunyzr2qmes2fq37oumybpudrd4jjj4e4vk4uusa.b32.i2p/hosts.txt
-## Optional subscriptions URLs, separated by comma
-# subscriptions = http://reg.i2p/hosts.txt,http://identiguy.i2p/hosts.txt,http://stats.i2p/cgi-bin/newhosts.txt
-
-[limits]
-## Maximum active transit sessions (default: 5000)
-## This value is doubled if floodfill mode is enabled!
-# transittunnels = 5000
-## Limit number of open file descriptors (0 - use system limit)
-# openfiles = 0
-## Maximum size of corefile in Kb (0 - use system limit)
-# coresize = 0
-
-[trust]
-## Enable explicit trust options. (default: false)
-# enabled = true
-## Make direct I2P connections only to routers in specified Family.
-# family = MyFamily
-## Make direct I2P connections only to routers specified here. Comma separated list of base64 identities.
-# routers =
-## Should we hide our router from other routers? (default: false)
-# hidden = true
-
-[exploratory]
-## Exploratory tunnels settings with default values
-# inbound.length = 2
-# inbound.quantity = 3
-# outbound.length = 2
-# outbound.quantity = 3
-
-[persist]
-## Save peer profiles on disk (default: true)
-# profiles = true
-## Save full addresses on disk (default: true)
-# addressbook = true
-
diff --git a/straper/db/public/i2pd/etc-i2pd/subscriptions.txt b/straper/db/public/i2pd/etc-i2pd/subscriptions.txt
deleted file mode 100644
index 76d7399..0000000
--- a/straper/db/public/i2pd/etc-i2pd/subscriptions.txt
+++ /dev/null
@@ -1,4 +0,0 @@
-http://reg.i2p/hosts.txt
-http://identiguy.i2p/hosts.txt
-http://stats.i2p/cgi-bin/newhosts.txt
-http://i2p-projekt.i2p/hosts.txt
diff --git a/straper/db/public/i2pd/etc-i2pd/tunnels.conf b/straper/db/public/i2pd/etc-i2pd/tunnels.conf
deleted file mode 100644
index b31f61c..0000000
--- a/straper/db/public/i2pd/etc-i2pd/tunnels.conf
+++ /dev/null
@@ -1,34 +0,0 @@
-[IRC-ILITA]
-type = client
-address = 127.0.0.1
-port = 6668
-destination = irc.ilita.i2p
-destinationport = 6667
-keys = irc-keys.dat
-i2p.streaming.profile=2
-
-#[IRC-IRC2P]
-#type = client
-#address = 127.0.0.1
-#port = 6669
-#destination = irc.postman.i2p
-#destinationport = 6667
-#keys = irc-keys.dat
-
-[SMTP]
-type = client
-address = 127.0.0.1
-port = 7659
-destination = smtp.postman.i2p
-destinationport = 25
-#keys = smtp-keys.dat
-
-[POP3]
-type = client
-address = 127.0.0.1
-port = 7660
-destination = pop.postman.i2p
-destinationport = 110
-#keys = pop3-keys.dat
-
-# see more examples at https://i2pd.readthedocs.io/en/latest/user-guide/tunnels/
diff --git a/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/IRC-Ilita.conf b/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/IRC-Ilita.conf
deleted file mode 100644
index 74d836a..0000000
--- a/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/IRC-Ilita.conf
+++ /dev/null
@@ -1,7 +0,0 @@
-#[IRC-ILITA]
-#type = client
-#address = 127.0.0.1
-#port = 6669
-#destination = irc.ilita.i2p
-#destinationport = 6667
-#keys = irc-keys.dat
diff --git a/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/IRC-Irc2P.conf b/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/IRC-Irc2P.conf
deleted file mode 100644
index 97da71d..0000000
--- a/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/IRC-Irc2P.conf
+++ /dev/null
@@ -1,7 +0,0 @@
-#[IRC-IRC2P]
-#type = client
-#address = 127.0.0.1
-#port = 6668
-#destination = irc.postman.i2p
-#destinationport = 6667
-#keys = irc-keys.dat
diff --git a/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/README b/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/README
deleted file mode 100644
index 7b07c4b..0000000
--- a/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/README
+++ /dev/null
@@ -1,4 +0,0 @@
-# In that directory you can store separated config files for every tunnel.
-# Please read documentation for more info.
-#
-# You can find examples in /usr/share/doc/i2pd/tunnels.d directory
diff --git a/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/labunix-website.conf b/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/labunix-website.conf
deleted file mode 100644
index 3405f9a..0000000
--- a/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/labunix-website.conf
+++ /dev/null
@@ -1,5 +0,0 @@
-[labunix-website]
-type = http
-host = 127.0.0.1
-port = 8089
-keys = labunix-website.dat
diff --git a/straper/db/public/i2pd/etc-i2pd/tunnels.d/IRC-Ilita.conf b/straper/db/public/i2pd/etc-i2pd/tunnels.d/IRC-Ilita.conf
deleted file mode 100644
index 74d836a..0000000
--- a/straper/db/public/i2pd/etc-i2pd/tunnels.d/IRC-Ilita.conf
+++ /dev/null
@@ -1,7 +0,0 @@
-#[IRC-ILITA]
-#type = client
-#address = 127.0.0.1
-#port = 6669
-#destination = irc.ilita.i2p
-#destinationport = 6667
-#keys = irc-keys.dat
diff --git a/straper/db/public/i2pd/etc-i2pd/tunnels.d/IRC-Irc2P.conf b/straper/db/public/i2pd/etc-i2pd/tunnels.d/IRC-Irc2P.conf
deleted file mode 100644
index 97da71d..0000000
--- a/straper/db/public/i2pd/etc-i2pd/tunnels.d/IRC-Irc2P.conf
+++ /dev/null
@@ -1,7 +0,0 @@
-#[IRC-IRC2P]
-#type = client
-#address = 127.0.0.1
-#port = 6668
-#destination = irc.postman.i2p
-#destinationport = 6667
-#keys = irc-keys.dat
diff --git a/straper/db/public/i2pd/etc-i2pd/tunnels.d/README b/straper/db/public/i2pd/etc-i2pd/tunnels.d/README
deleted file mode 100644
index 7b07c4b..0000000
--- a/straper/db/public/i2pd/etc-i2pd/tunnels.d/README
+++ /dev/null
@@ -1,4 +0,0 @@
-# In that directory you can store separated config files for every tunnel.
-# Please read documentation for more info.
-#
-# You can find examples in /usr/share/doc/i2pd/tunnels.d directory
diff --git a/straper/db/public/i2pd/etc-i2pd/tunnels.d/labunix-website.conf b/straper/db/public/i2pd/etc-i2pd/tunnels.d/labunix-website.conf
deleted file mode 100644
index 3405f9a..0000000
--- a/straper/db/public/i2pd/etc-i2pd/tunnels.d/labunix-website.conf
+++ /dev/null
@@ -1,5 +0,0 @@
-[labunix-website]
-type = http
-host = 127.0.0.1
-port = 8089
-keys = labunix-website.dat