diff options
Diffstat (limited to 'straper/db/public/i2pd')
11 files changed, 363 insertions, 0 deletions
diff --git a/straper/db/public/i2pd/etc-i2pd/i2pd.conf b/straper/db/public/i2pd/etc-i2pd/i2pd.conf new file mode 100644 index 0000000..c26f8af --- /dev/null +++ b/straper/db/public/i2pd/etc-i2pd/i2pd.conf @@ -0,0 +1,279 @@ +## Configuration file for a typical i2pd user +## See https://i2pd.readthedocs.io/en/latest/user-guide/configuration/ +## for more options you can use in this file. + +## Lines that begin with "## " try to explain what's going on. Lines +## that begin with just "#" are disabled commands: you can enable them +## by removing the "#" symbol. + +## Tunnels config file +## Default: ~/.i2pd/tunnels.conf or /var/lib/i2pd/tunnels.conf +# tunconf = /var/lib/i2pd/tunnels.conf + +## Tunnels config files path +## Use that path to store separated tunnels in different config files. +## Default: ~/.i2pd/tunnels.d or /var/lib/i2pd/tunnels.d +# tunnelsdir = /var/lib/i2pd/tunnels.d + +## Path to certificates used for verifying .su3, families +## Default: ~/.i2pd/certificates or /var/lib/i2pd/certificates +# certsdir = /var/lib/i2pd/certificates + +## Where to write pidfile (default: /run/i2pd.pid, not used in Windows) +# pidfile = /run/i2pd.pid + +## Logging configuration section +## By default logs go to stdout with level 'info' and higher +## For Windows OS by default logs go to file with level 'warn' and higher +## +## Logs destination (valid values: stdout, file, syslog) +## * stdout - print log entries to stdout +## * file - log entries to a file +## * syslog - use syslog, see man 3 syslog +# log = file +## Path to logfile (default: autodetect) +# logfile = /var/log/i2pd/i2pd.log +## Log messages above this level (debug, info, *warn, error, critical, none) +## If you set it to none, logging will be disabled +# loglevel = warn +## Write full CLF-formatted date and time to log (default: write only time) +# logclftime = true + +## Daemon mode. Router will go to background after start. Ignored on Windows +## (default: true) +# daemon = true + +## Specify a family, router belongs to (default - none) +# family = + +## Network interface to bind to +## Updates address4/6 options if they are not set +# ifname = +## You can specify different interfaces for IPv4 and IPv6 +# ifname4 = +# ifname6 = + +## Local address to bind transport sockets to +## Overrides host option if: +## For ipv4: if ipv4 = true and nat = false +## For ipv6: if 'host' is not set or ipv4 = true +# address4 = +# address6 = + +## External IPv4 or IPv6 address to listen for connections +## By default i2pd sets IP automatically +## Sets published NTCP2v4/SSUv4 address to 'host' value if nat = true +## Sets published NTCP2v6/SSUv6 address to 'host' value if ipv4 = false +# host = 1.2.3.4 + +## Port to listen for connections +## By default i2pd picks random port. You MUST pick a random number too, +## don't just uncomment this +# port = 4567 + +## Enable communication through ipv4 (default: true) +ipv4 = true +## Enable communication through ipv6 (default: false) +ipv6 = false + +## Bandwidth configuration +## L limit bandwidth to 32 KB/sec, O - to 256 KB/sec, P - to 2048 KB/sec, +## X - unlimited +## Default is L (regular node) and X if floodfill mode enabled. +## If you want to share more bandwidth without floodfill mode, uncomment +## that line and adjust value to your possibilities. Value can be set to +## integer in kilobytes, it will apply that limit and flag will be used +## from next upper limit (example: if you set 4096 flag will be X, but real +## limit will be 4096 KB/s). Same can be done when floodfill mode is used, +## but keep in mind that low values may be negatively evaluated by Java +## router algorithms. +# bandwidth = L +## Max % of bandwidth limit for transit. 0-100 (default: 100) +# share = 100 + +## Router will not accept transit tunnels, disabling transit traffic completely +## (default: false) +# notransit = true + +## Router will be floodfill (default: false) +## Note: that mode uses much more network connections and CPU! +# floodfill = true + +[ntcp2] +## Enable NTCP2 transport (default: true) +# enabled = true +## Publish address in RouterInfo (default: true) +# published = true +## Port for incoming connections (default is global port option value) +# port = 4567 + +[ssu2] +## Enable SSU2 transport (default: true) +# enabled = true +## Publish address in RouterInfo (default: true) +# published = true +## Port for incoming connections (default is global port option value) +# port = 4567 + +[http] +## Web Console settings +## Enable the Web Console (default: true) +# enabled = true +## Address and port service will listen on (default: 127.0.0.1:7070) +# address = 127.0.0.1 +# port = 7070 +## Path to web console (default: /) +# webroot = / +## Enable Web Console authentication (default: false) +## You should not use Web Console via public networks without additional encryption. +## HTTP authentication is not encryption layer! +# auth = true +# user = i2pd +# pass = changeme +## Select webconsole language +## Currently supported english (default), afrikaans, armenian, chinese, czech, french, +## german, italian, polish, portuguese, russian, spanish, turkish, turkmen, ukrainian +## and uzbek languages +# lang = english + +[httpproxy] +## Enable the HTTP proxy (default: true) +# enabled = true +## Address and port service will listen on (default: 127.0.0.1:4444) +# address = 127.0.0.1 +# port = 4444 +## Optional keys file for proxy local destination (default: http-proxy-keys.dat) +# keys = http-proxy-keys.dat +## Enable address helper for adding .i2p domains with "jump URLs" (default: true) +## You should disable this feature if your i2pd HTTP Proxy is public, +## because anyone could spoof the short domain via addresshelper and forward other users to phishing links +# addresshelper = true +## Address of a proxy server inside I2P, which is used to visit regular Internet +# outproxy = http://false.i2p +## httpproxy section also accepts I2CP parameters, like "inbound.length" etc. + +[socksproxy] +## Enable the SOCKS proxy (default: true) +# enabled = true +## Address and port service will listen on (default: 127.0.0.1:4447) +# address = 127.0.0.1 +# port = 4447 +## Optional keys file for proxy local destination (default: socks-proxy-keys.dat) +# keys = socks-proxy-keys.dat +## Socks outproxy. Example below is set to use Tor for all connections except i2p +## Enable using of SOCKS outproxy (works only with SOCKS4, default: false) +# outproxy.enabled = false +## Address and port of outproxy +# outproxy = 127.0.0.1 +# outproxyport = 9050 +## socksproxy section also accepts I2CP parameters, like "inbound.length" etc. + +[sam] +## Enable the SAM bridge (default: true) +# enabled = false +## Address and ports service will listen on (default: 127.0.0.1:7656, udp: 7655) +# address = 127.0.0.1 +# port = 7656 +# portudp = 7655 + +[bob] +## Enable the BOB command channel (default: false) +# enabled = false +## Address and port service will listen on (default: 127.0.0.1:2827) +# address = 127.0.0.1 +# port = 2827 + +[i2cp] +## Enable the I2CP protocol (default: false) +# enabled = false +## Address and port service will listen on (default: 127.0.0.1:7654) +# address = 127.0.0.1 +# port = 7654 + +[i2pcontrol] +## Enable the I2PControl protocol (default: false) +# enabled = false +## Address and port service will listen on (default: 127.0.0.1:7650) +# address = 127.0.0.1 +# port = 7650 +## Authentication password (default: itoopie) +# password = itoopie + +[precomputation] +## Enable or disable elgamal precomputation table +## By default, enabled on i386 hosts +# elgamal = true + +[upnp] +## Enable or disable UPnP: automatic port forwarding (enabled by default in WINDOWS, ANDROID) +# enabled = false +## Name i2pd appears in UPnP forwardings list (default: I2Pd) +# name = I2Pd + +[meshnets] +## Enable connectivity over the Yggdrasil network (default: false) +# yggdrasil = false +## You can bind address from your Yggdrasil subnet 300::/64 +## The address must first be added to the network interface +# yggaddress = + +[reseed] +## Options for bootstrapping into I2P network, aka reseeding +## Enable reseed data verification (default: true) +verify = true +## URLs to request reseed data from, separated by comma +## Default: "mainline" I2P Network reseeds +# urls = https://reseed.i2p-projekt.de/,https://i2p.mooo.com/netDb/,https://netdb.i2p2.no/ +## Reseed URLs through the Yggdrasil, separated by comma +# yggurls = http://[324:71e:281a:9ed3::ace]:7070/ +## Path to local reseed data file (.su3) for manual reseeding +# file = /path/to/i2pseeds.su3 +## or HTTPS URL to reseed from +# file = https://legit-website.com/i2pseeds.su3 +## Path to local ZIP file or HTTPS URL to reseed from +# zipfile = /path/to/netDb.zip +## If you run i2pd behind a proxy server, set proxy server for reseeding here +## Should be http://address:port or socks://address:port +# proxy = http://127.0.0.1:8118 +## Minimum number of known routers, below which i2pd triggers reseeding (default: 25) +# threshold = 25 + +[addressbook] +## AddressBook subscription URL for initial setup +## Default: reg.i2p at "mainline" I2P Network +# defaulturl = http://shx5vqsw7usdaunyzr2qmes2fq37oumybpudrd4jjj4e4vk4uusa.b32.i2p/hosts.txt +## Optional subscriptions URLs, separated by comma +# subscriptions = http://reg.i2p/hosts.txt,http://identiguy.i2p/hosts.txt,http://stats.i2p/cgi-bin/newhosts.txt + +[limits] +## Maximum active transit sessions (default: 5000) +## This value is doubled if floodfill mode is enabled! +# transittunnels = 5000 +## Limit number of open file descriptors (0 - use system limit) +# openfiles = 0 +## Maximum size of corefile in Kb (0 - use system limit) +# coresize = 0 + +[trust] +## Enable explicit trust options. (default: false) +# enabled = true +## Make direct I2P connections only to routers in specified Family. +# family = MyFamily +## Make direct I2P connections only to routers specified here. Comma separated list of base64 identities. +# routers = +## Should we hide our router from other routers? (default: false) +# hidden = true + +[exploratory] +## Exploratory tunnels settings with default values +# inbound.length = 2 +# inbound.quantity = 3 +# outbound.length = 2 +# outbound.quantity = 3 + +[persist] +## Save peer profiles on disk (default: true) +# profiles = true +## Save full addresses on disk (default: true) +# addressbook = true + diff --git a/straper/db/public/i2pd/etc-i2pd/subscriptions.txt b/straper/db/public/i2pd/etc-i2pd/subscriptions.txt new file mode 100644 index 0000000..76d7399 --- /dev/null +++ b/straper/db/public/i2pd/etc-i2pd/subscriptions.txt @@ -0,0 +1,4 @@ +http://reg.i2p/hosts.txt +http://identiguy.i2p/hosts.txt +http://stats.i2p/cgi-bin/newhosts.txt +http://i2p-projekt.i2p/hosts.txt diff --git a/straper/db/public/i2pd/etc-i2pd/tunnels.conf b/straper/db/public/i2pd/etc-i2pd/tunnels.conf new file mode 100644 index 0000000..b31f61c --- /dev/null +++ b/straper/db/public/i2pd/etc-i2pd/tunnels.conf @@ -0,0 +1,34 @@ +[IRC-ILITA] +type = client +address = 127.0.0.1 +port = 6668 +destination = irc.ilita.i2p +destinationport = 6667 +keys = irc-keys.dat +i2p.streaming.profile=2 + +#[IRC-IRC2P] +#type = client +#address = 127.0.0.1 +#port = 6669 +#destination = irc.postman.i2p +#destinationport = 6667 +#keys = irc-keys.dat + +[SMTP] +type = client +address = 127.0.0.1 +port = 7659 +destination = smtp.postman.i2p +destinationport = 25 +#keys = smtp-keys.dat + +[POP3] +type = client +address = 127.0.0.1 +port = 7660 +destination = pop.postman.i2p +destinationport = 110 +#keys = pop3-keys.dat + +# see more examples at https://i2pd.readthedocs.io/en/latest/user-guide/tunnels/ diff --git a/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/IRC-Ilita.conf b/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/IRC-Ilita.conf new file mode 100644 index 0000000..74d836a --- /dev/null +++ b/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/IRC-Ilita.conf @@ -0,0 +1,7 @@ +#[IRC-ILITA] +#type = client +#address = 127.0.0.1 +#port = 6669 +#destination = irc.ilita.i2p +#destinationport = 6667 +#keys = irc-keys.dat diff --git a/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/IRC-Irc2P.conf b/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/IRC-Irc2P.conf new file mode 100644 index 0000000..97da71d --- /dev/null +++ b/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/IRC-Irc2P.conf @@ -0,0 +1,7 @@ +#[IRC-IRC2P] +#type = client +#address = 127.0.0.1 +#port = 6668 +#destination = irc.postman.i2p +#destinationport = 6667 +#keys = irc-keys.dat diff --git a/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/README b/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/README new file mode 100644 index 0000000..7b07c4b --- /dev/null +++ b/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/README @@ -0,0 +1,4 @@ +# In that directory you can store separated config files for every tunnel. +# Please read documentation for more info. +# +# You can find examples in /usr/share/doc/i2pd/tunnels.d directory diff --git a/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/labunix-website.conf b/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/labunix-website.conf new file mode 100644 index 0000000..3405f9a --- /dev/null +++ b/straper/db/public/i2pd/etc-i2pd/tunnels.conf.d/labunix-website.conf @@ -0,0 +1,5 @@ +[labunix-website] +type = http +host = 127.0.0.1 +port = 8089 +keys = labunix-website.dat diff --git a/straper/db/public/i2pd/etc-i2pd/tunnels.d/IRC-Ilita.conf b/straper/db/public/i2pd/etc-i2pd/tunnels.d/IRC-Ilita.conf new file mode 100644 index 0000000..74d836a --- /dev/null +++ b/straper/db/public/i2pd/etc-i2pd/tunnels.d/IRC-Ilita.conf @@ -0,0 +1,7 @@ +#[IRC-ILITA] +#type = client +#address = 127.0.0.1 +#port = 6669 +#destination = irc.ilita.i2p +#destinationport = 6667 +#keys = irc-keys.dat diff --git a/straper/db/public/i2pd/etc-i2pd/tunnels.d/IRC-Irc2P.conf b/straper/db/public/i2pd/etc-i2pd/tunnels.d/IRC-Irc2P.conf new file mode 100644 index 0000000..97da71d --- /dev/null +++ b/straper/db/public/i2pd/etc-i2pd/tunnels.d/IRC-Irc2P.conf @@ -0,0 +1,7 @@ +#[IRC-IRC2P] +#type = client +#address = 127.0.0.1 +#port = 6668 +#destination = irc.postman.i2p +#destinationport = 6667 +#keys = irc-keys.dat diff --git a/straper/db/public/i2pd/etc-i2pd/tunnels.d/README b/straper/db/public/i2pd/etc-i2pd/tunnels.d/README new file mode 100644 index 0000000..7b07c4b --- /dev/null +++ b/straper/db/public/i2pd/etc-i2pd/tunnels.d/README @@ -0,0 +1,4 @@ +# In that directory you can store separated config files for every tunnel. +# Please read documentation for more info. +# +# You can find examples in /usr/share/doc/i2pd/tunnels.d directory diff --git a/straper/db/public/i2pd/etc-i2pd/tunnels.d/labunix-website.conf b/straper/db/public/i2pd/etc-i2pd/tunnels.d/labunix-website.conf new file mode 100644 index 0000000..3405f9a --- /dev/null +++ b/straper/db/public/i2pd/etc-i2pd/tunnels.d/labunix-website.conf @@ -0,0 +1,5 @@ +[labunix-website] +type = http +host = 127.0.0.1 +port = 8089 +keys = labunix-website.dat |