feat: first fully successful run e2e on straper

1 files changed, 162 insertions, 0 deletions

diff --git a/straper/db/public/fail2ban/etc-fail2ban/action.d/iptables.conf b/straper/db/public/fail2ban/etc-fail2ban/action.d/iptables.conf
new file mode 100644
index 0000000..382716a
--- /dev/null
+++ b/straper/db/public/fail2ban/etc-fail2ban/action.d/iptables.conf
@@ -0,0 +1,162 @@
+# Fail2Ban configuration file
+#
+# Authors: Sergey G. Brester (sebres), Cyril Jaquier, Daniel Black, 
+#          Yaroslav O. Halchenko, Alexander Koeppe et al.
+#
+
+[Definition]
+
+# Option:  type
+# Notes.:  type of the action.
+# Values:  [ oneport | multiport | allports ]  Default: oneport
+#
+type = oneport
+
+# Option:  actionflush
+# Notes.:  command executed once to flush IPS, by shutdown (resp. by stop of the jail or this action)
+# Values:  CMD
+#
+actionflush = <iptables> -F f2b-<name>
+
+# Option:  actionstart
+# Notes.:  command executed on demand at the first ban (or at the start of Fail2Ban if actionstart_on_demand is set to false).
+# Values:  CMD
+#
+actionstart = { <iptables> -C f2b-<name> -j <returntype> >/dev/null 2>&1; } || { <iptables> -N f2b-<name> || true; <iptables> -A f2b-<name> -j <returntype>; }
+              <_ipt_add_rules>
+
+# Option:  actionstop
+# Notes.:  command executed at the stop of jail (or at the end of Fail2Ban)
+# Values:  CMD
+#
+actionstop = <_ipt_del_rules>
+             <actionflush>
+             <iptables> -X f2b-<name>
+
+# Option:  actioncheck
+# Notes.:  command executed once before each actionban command
+# Values:  CMD
+#
+actioncheck = <_ipt_check_rules>
+
+# Option:  actionban
+# Notes.:  command executed when banning an IP. Take care that the
+#          command is executed with Fail2Ban user rights.
+# Tags:    See jail.conf(5) man page
+# Values:  CMD
+#
+actionban = <iptables> -I f2b-<name> 1 -s <ip> -j <blocktype>
+
+# Option:  actionunban
+# Notes.:  command executed when unbanning an IP. Take care that the
+#          command is executed with Fail2Ban user rights.
+# Tags:    See jail.conf(5) man page
+# Values:  CMD
+#
+actionunban = <iptables> -D f2b-<name> -s <ip> -j <blocktype>
+
+# Option:  pre-rule
+# Notes.:  prefix parameter(s) inserted to the begin of rule. No default (empty)
+#
+pre-rule =
+
+rule-jump = -j <_ipt_rule_target>
+
+# Several capabilities used internally:
+
+_ipt_for_proto-iter = for proto in $(echo '<protocol>' | sed 's/,/ /g'); do
+_ipt_for_proto-done = done
+
+_ipt_add_rules = <_ipt_for_proto-iter>
+              { %(_ipt_check_rule)s >/dev/null 2>&1; } || { <iptables> -I <chain> %(_ipt_chain_rule)s; }
+              <_ipt_for_proto-done>
+
+_ipt_del_rules = <_ipt_for_proto-iter>
+              <iptables> -D <chain> %(_ipt_chain_rule)s
+              <_ipt_for_proto-done>
+
+_ipt_check_rules = <_ipt_for_proto-iter>
+              %(_ipt_check_rule)s
+              <_ipt_for_proto-done>
+
+_ipt_chain_rule = <pre-rule><ipt_<type>/_chain_rule>
+_ipt_check_rule = <iptables> -C <chain> %(_ipt_chain_rule)s
+_ipt_rule_target = f2b-<name>
+
+[ipt_oneport]
+
+_chain_rule = -p $proto --dport <port> <rule-jump>
+
+[ipt_multiport]
+
+_chain_rule = -p $proto -m multiport --dports <port> <rule-jump>
+
+[ipt_allports]
+
+_chain_rule = -p $proto <rule-jump>
+
+
+[Init]
+
+# Option:  chain
+# Notes    specifies the iptables chain to which the Fail2Ban rules should be
+#          added
+# Values:  STRING  Default: INPUT
+chain = INPUT
+
+# Default name of the chain
+#
+name = default
+
+# Option:  port
+# Notes.:  specifies port to monitor
+# Values:  [ NUM | STRING ]  Default:
+#
+port = ssh
+
+# Option:  protocol
+# Notes.:  internally used by config reader for interpolations.
+# Values:  [ tcp | udp | icmp | all ] Default: tcp
+#
+protocol = tcp
+
+# Option:  blocktype
+# Note:    This is what the action does with rules. This can be any jump target
+#          as per the iptables man page (section 8). Common values are DROP
+#          REJECT, REJECT --reject-with icmp-port-unreachable
+# Values:  STRING
+blocktype = REJECT --reject-with icmp-port-unreachable
+
+# Option:  returntype
+# Note:    This is the default rule on "actionstart". This should be RETURN
+#          in all (blocking) actions, except REJECT in allowing actions.
+# Values:  STRING
+returntype = RETURN
+
+# Option:  lockingopt
+# Notes.:  Option was introduced to iptables to prevent multiple instances from
+#          running concurrently and causing irratic behavior.  -w was introduced
+#          in iptables 1.4.20, so might be absent on older systems
+#          See https://github.com/fail2ban/fail2ban/issues/1122
+# Values:  STRING
+lockingopt = -w
+
+# Option:  iptables
+# Notes.:  Actual command to be executed, including common to all calls options
+# Values:  STRING
+iptables = iptables <lockingopt>
+
+
+[Init?family=inet6]
+
+# Option:  blocktype (ipv6)
+# Note:    This is what the action does with rules. This can be any jump target
+#          as per the iptables man page (section 8). Common values are DROP
+#          REJECT, REJECT --reject-with icmp6-port-unreachable
+# Values:  STRING
+blocktype = REJECT --reject-with icmp6-port-unreachable
+
+# Option:  iptables (ipv6)
+# Notes.:  Actual command to be executed, including common to all calls options
+# Values:  STRING
+iptables = ip6tables <lockingopt>